4 Copying
68
Logging in to the Machine
The following procedure describes how to log in to the machine when Copy Auditron is
enabled on the machine. For information about the Copy Auditron feature, refer to the
Accounting and Securities chapter in the System Administration Guide.
1.
When Copy Auditron is enabled, [Id]
appears blinking in the Display.
Enter a user ID using the numeric
keypad.
NOTE:
A user ID is a three-digit number.
The user ID that you have entered
appears in the Display.
2.
Press the <Start> button to confirm the
entered user ID.
• If a passcode is not set for the user ID,
the machine enters the Copy Mode,
and [1] appears in the Display.
Proceed to Step 5.
• If a passcode is set for the user ID,
[---] appears in the Display. Proceed to
Step 3.
3.
Enter a passcode which corresponds to
the user ID that you just entered using
the numeric keypad.
NOTE:
If you have entered an incorrect
value, press the <C> button to clear the
wrongly entered value.
Numeric keys
<Start> button
<C> button
Numeric keys
Содержание WorkCentre 5020DN
