Xerox WorkCentre 4118, Руководство системного администратора

Страница: 81 / 123

Xerox WorkCentre 4118 System Administration Guide Page 7-19
Network Installation
Us
in
g In
te
rn
et
Se
rvic
es
¾
Select the [Status] tab and then select [Reset Network Controller] to enable the selections
to take effect.
¾
Continue with Test Print .
Test Print
To ensure the device has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
¾
Open a document on a client workstation.
¾
Select the device as the printer to which the selected document will be sent.
¾
Print the document on the device and verify that it prints correctly.
¾
Ensure the driver is installed on every workstation that will be sending jobs to the device.
¾
Repeat the test for all workstations that will be sending jobs to the device.
¾
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
6
7
1
2
3
4
5
6