Xerox WorkCentre 4118, Руководство системного администратора

Страница: 76 / 123

Page 7-14 Xerox WorkCentre 4118 System Administration Guide
Netwo
rk In
stal
lation Using Inter
net Ser
v
ices
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾
You can Add or Edit a Trap Destination Address by making the following selections and
settings in the Trap Destination Addresses section of the frame:
Click the [Add] button or the [Edit] button to add a new address or amend an existing
address.
In the IP Address Destination section, enter or amend the IP Address and UDP Port
Number .
In the Traps section, enter the Trap Community Name and check the boxes corresponding
to the required Traps to be Received .
¾
Click the [Apply] button to implement any changes and return to the first screen.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾
You can Delete a Trap Destination Address from the Trap Destination Addresses section
of the frame:
Highlight the required Address/Socket or Port and click the [Delete] button.
¾
Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾
Select the [Status] tab and then select [Reset Network Controller] to enable the selections
to take effect.
6
7
8
9