Xerox WorkCentre 4118, Руководство системного администратора

Страница: 97 / 123

Xerox WorkCentre 4118 System Administration Guide Page 8-11
L
o
cal Conn
ection
Test Print or Scan
To ensure the WorkCentre 4118 has been installed correctly a test print or scan should be
submitted from the workstation.
Test Print
Perform the following steps:
¾
Open a document on the workstation.
¾
Select the WorkCentre 4118 as the printer to which the document will be sent.
¾
Print the selected document on the device and verify that it prints correctly.
¾
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
Test Scan
¾
Open the TWAIN compliant application used to scan documents.
¾
Place a document in the WorkCentre 4118 .
¾
Follow the instructions for scanning from the Help supplied by the application to scan
verify that it scans correctly.
¾
The installation process is now complete.
If the test scan fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
1
2
3
4