![background image](http://html.mh-extra.com/html/xerox/workcentre-3025bi/workcentre-3025bi_service-manual_884171011.webp)
June 2014
vii
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
Reference Symbology, Voltage Specifications
Electrical Current
Danger label indicates where electrical currents travel when the machine is closed and operat-
ing. Use caution when reaching in the machine.
ESD
Certain components in this product are susceptible to damage from Electrostatic Discharge.
Observe all ESD procedures to avoid component damage.
Voltage Specifications
AC and DC Voltages
Measurements of DC voltage must be made with reference to the specified DC Common,
unless some other point is referenced in a diagnostic procedure. All measurements of AC volt-
age should be made with respect to the adjacent return or ACN wire (
Table 1
).
Logic Voltage Levels
Measurements of logic levels must be made with reference to the specified DC Common,
unless some other point is referenced in a diagnostic procedure (
Table 2
).
DC Voltage Measurements in RAPs
The RAPs have been designed so that when it is required to use the DMM to measure a DC
voltage, the first test point listed is the location for the red (+) meter lead and the second test
point is the location for the black meter lead. For example, the following statement may be
found in a RAP:
There is +5 VDC from TP7 to TP68.
In this example, the red meter lead would be placed on TP7 and the black meter lead on TP68.
Another example of a statement found in a RAP might be:
There is -15 VDC from TP21 to TP33.
In this example, the red meter lead would be placed on TP21 and the black meter lead would
be placed on TP33.
If a second test point is not given, it is assumed that the black meter lead may be attached to
the copier frame.
Table 1 Voltage Measurement and Specifications
VOLTAGE
SPECIFICATION
110 to120 VAC 60Hz
100 to 132 VAC
Neutral to Ground VAC
0 VAC (+/- 5VAC)
+5 VDC
+5.05 VDC TO +5.25 VDC
+12 VDC
+11.4 VDC TO +12.6 VDC
-12 VDC
-11.4 VDC TO -12.6 VDC
+24 VDC
+22.8VDC TO +25.2 VDC
+36 VDC
+34.2 VDC TO +37.8 VDC
Table 2 Logic Levels
VOLTAGE
H/L SPECIFICATIONS
+5 VDC
H= +3.00 TO +5.25 VDC, L=
0.0 TO 0.8 VDC
+24 VDC
H= +23.37 TO +27.06 VDC,
L= 0.0 TO 0.8 VDC
Содержание WorkCentre 3025BI
