Xerox Wide Format IJP 2000 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 136

Xerox Wide Format IJP 2000 Скачать руководство пользователя страница 30

1

Before Using the Machine

1.2 Power Source

30

1.2

Power Source

1.2.1

Switching the Power On

The machine warms up and becomes ready to print within about 10 minutes after being powered on.
The Energy Saver feature allows you to reduce the power consumption of the machine, saving electricity.

Important



Do not turn off the power straight after turning the power switch on. If you turn the power off before the "Ready"
message appears on the touch screen, the system could be damaged.

Note



The machine consumes 11W or less even when the power switch is turned off. To avoid consuming (or save) this
standby power, turn the power breaker OFF. For information on how to do this, refer to "1.2.3 Saving Power
Consumption While the Machine is not in Use" (p. 32).

Refer



For information on the Energy Saver feature, refer to "1.3 Energy Saver Mode" (p. 33).

Steps

1.

Press the power switch to the [|] position to switch the power on.

Note



The "Please wait..." message indicates that the machine
is warming up. The machine cannot be used while it is
warming up.

«
...
28
29
30
31
32
...
»

Содержание Wide Format IJP 2000









































































































































Отзывы:

Нет отзывов