![background image](http://html1.mh-extra.com/html/xerox/phaser6700/phaser6700_system-administrator-manual_4224868022.webp)
Network Configuration
22
Phaser 6700 Color Printer
System Administrator Guide
Configuring Dynamic Address Settings for IPv4
1.
At the control panel, touch
Printer
.
2.
Touch the
Tools
tab, then touch
Setup
.
3.
Touch
Network & USB
.
4.
Touch
Ethernet
.
5.
Touch
TCP/IP (v4)
.
6.
Touch
On:DHCP
.
7.
Touch
OK
.
Configuring Dynamic Address Settings for IPv6
1.
At the control panel, touch
Printer
.
2.
Touch the
Tools
tab, then touch
Setup
.
3.
Touch
Network & USB
.
4.
Touch
Ethernet
.
5.
Touch
TCP/IP (v6)
.
6.
Touch
DHCPv6
.
7.
Select
Enable DHCPv6
.
8.
Under Mode, select
Router
,
Stateful
, or
Stateless
.
9.
Touch
Apply Now
.
10.
Touch
OK
.
Configuring IP Settings in CentreWare Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in CentreWare Internet
Services.
Configuring IPv4
You can use IPv4 or IPv6 in addition to or in place of the other.
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Protocols
.
2.
Click
IP (Internet Protocol)
>
IPv4
.
3.
Under Protocol, select
Enabled
to enable the protocol.
CAUTION:
If both IPv4 and IPv6 are disabled, you cannot access CentreWare Internet Services. To
access IPv4 and IPv6 settings in CentreWare Internet Services, enable TCP/IP at the printer control
panel. If you disable TCP/IP or change the IP address, any dependent protocols are disabled and the
network controller restarts.
4.
Under IP Address Resolution select an option from the drop-down list. Depending on the option you
select, some or all of the fields can be disabled.
STATIC
: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.