Initial Setup
Phaser 6700 Color Printer
13
System Administrator Guide
Initial Setup at the Control Panel
System Administrator Access
If a system administrator has locked access to a control panel setting, a message appears when you
attempt to access the setting. The message prompts you to log in as an administrator.
1.
Type
admin
and touch
Next
.
2.
Type the administrator password and touch
OK
. The default password is
1111
.
Manually Setting the Ethernet Interface Speed
The Ethernet interface on the printer automatically detects the speed of your network. Any auto-sensing
devices connected to the network, such as a hub, do not always detect the correct speed. Refer to the
configuration report to ensure that the printer detects the correct network speed.
1.
At the control panel, touch
Printer
.
2.
Touch the
Tools
tab, then touch
Setup
.
3.
Touch
Network & USB
.
4.
Touch
Ethernet
.
5.
Touch
Connection Speed
.
6.
Touch the appropriate speed for your network.
7.
Touch
OK
.
Assigning a Network Address
The printer automatically acquires a network address from a DHCP server by default. To assign a static IP
address, configure DNS server settings, or configure other TCP/IP settings, see
IP
on page 21.
