Xerox Phaser EX7750, Руководство по цветам

Страница: 97 / 120

3
3-33 Using Spot-On
Using a measurement instrument to target colors
If you use the EFI Spectrometer ES-1000, you can import measured color values
directly into Spot-On. This feature allows you to target matches based on the actual
colors of immediate objects, such as the red of a printed logo or the yellow of a
packaging envelope.
For best results, download and save any measurement data you have gathered with
the ES-1000 in its offline state. Spot-On automatically clears stored data when it
establishes a connection with the instrument. For information about downloading
stored data from the ES-1000, see the documentation that accompanies the
instrument.
T
O IMPORT COLOR MEASUREMENTS INTO
S
POT
-O
N
1. Install and set up the ES-1000 for use with your computer.
For installation and setup instructions, see the documentation that accompanies
the instrument.
2. Choose Start from the Instrument menu.
The Choose Port dialog box appears.
3. For Instrument, choose the instrument you will use to take measurements.
For Port, choose the serial port connection of the instrument. Click OK.
The indicator light on the instrument flashes for a few moments as the connection
to Spot-On is established. When the flashing stops, the instrument is ready to read
measurements.