Printer Settings
Phaser® 6300/6350 Color Laser Printer
5-5
Using CentreWare IS
To select the Tray 1 (MPT) prompt timeout using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Propertie
s.
4.
Select the
General
folder on the left sidebar, and then select
Printer Defaults
.
5.
Select the appropriate prompt setting in the
Tray 1 (MPT) Prompt
drop-dowm list.
6.
Click the
Save Changes
button at the bottom of the page.
Setting the Duration for Tray 2 - 5 Prompts
The Tray 2 - 5 prompt setting specifies the amount of time the prompt displays on the control
panel after paper is loaded in Trays 2 - 5. The Tray 2 - 5 Prompt asks the person that loaded the
paper to confirm the current tray setup or to specify the paper type.
To select a Tray 2 - 5 prompt timeout, use either:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To change the Tray 2 - 5 prompt timeout on the control panel:
1.
Select
Paper Tray Setup
, and then press the
OK
button.
2.
Select
Paper Handling Setup
, and then press the
OK
button.
3.
Select
Tray 2 - 5 Prompt
, and then press the
OK
button.
4.
Select the appropriate prompt setting, and then press the
OK
button.
Using CentreWare IS
To select the Tray 2 - 5 prompt timeout using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Propertie
s.
4.
Select
General
on the left sidebar, and then select
Printer Defaults
.
5.
Select the appropriate prompt setting in the
Tray 2 - 5 Prompt
drop-dowm list.
6.
Click the
Save Changes
button at the bottom of the page.
Setting
Behavior
None
(Default)
Turns the tray setup prompt off.
30 seconds
Displays the tray setup prompt for 30 seconds after loading paper in Trays 2 - 5.
Infinite
Displays the tray setup prompt after paper is loaded in Trays 2 - 5 until a control panel
selection is made.
