Windows NT 4.x
Phaser® 6300/6350 Color Laser Printer
4-13
Configuring the Printer
To configure the printer:
1.
Insert the
Software and Documentation CD-ROM
into the computer’s CD-ROM drive, and
then click
Have Disk
.
2.
Click the
Browse
button and select the directory containing the Windows NT drivers.
3.
Select the
*.INF
file, and then click
Open
. Verify that the path and filename are correct,
and then click
OK
.
4.
Select the correct printer, and then click
OK
.
5.
Enter a name for the printer, select whether you want that printer to be the default, and
then click
OK
.
6.
Select one of these options:
■
If the printer is not shared, click
Next
.
■
If the printer is shared, enter a Share Name, check the
Share
box, and then click
Next
.
Printing a Test Page
You are prompted to print a test page.
1.
Select one of these options:
■
Click
Yes
to print a test page, and then click
Next
.
■
Click
No
if you do not want to print a test page, and then click
Next
.
2.
Select one of these options:
■
Click the
Finish
button if the data presented is correct. Proceed to Step 3.
■
Click the
Back
button to correct the data if incorrect, and then click
Finish
when the
data is correct. Proceed to Step 3.
3.
If you printed a test page, you are prompted to confirm that the test page printed:
■
Click
Yes
if the test page printed successfully.
■
Click
No
if the test page did not print or printed incorrectly.
See also:
Windows NT 4.x Troubleshooting
on page 4-14
