Printing Specialty Media from Tray 1 (MPT)
Phaser® 6300/6350 Color Laser Printer
3-3
Printing Specialty Media from Tray 1 (MPT)
To verify the specialty media you can print from Tray 1 (MPT):
■
See the
Recommended Media List
at
www.xerox.com/office/6300_6350support
.
■
Print the Paper Tips page. See
Determining Which Tray to Use
on page 3-2.
To print specialty media in Tray 1 (MPT):
1.
Open Tray 1 (MPT) by pulling out on the handle.
2.
Pull out the tray extension, and open the paper guides.
3.
Insert the paper into Tray 1 (MPT). If you are using preprinted or prepunched paper,
follow these guidelines:
■
For
single-sided printing
, place the side to be printed
facedown
with the
top
of the
page entering the printer first.
■
For
2-sided printing
, place the first side to be printed
faceup
with the
bottom
of the
page entering the printer first.
■
For
prepunched paper
, place the paper with the holes toward the right side of the
tray.
Note:
Do not load the paper above the fill line inside the tray.
4.
Adjust the paper guides to fit the paper.
5.
On the control panel, select the paper type and size:
a.
Select
Change setup
, and then press the
OK
button.
b.
Select the paper type, and then press the
OK
button.
c.
Select the paper size, and then press the
OK
button.
6.
In the printer driver, select either the paper type or
Tray 1 (MPT)
as the paper source.
7.
Submit your print job.
6300-008
MAX