Xerox Phaser 6180MFP, Руководство по обслуживанию

Страница: 554 / 884

5-28 Phaser 6180MFP Multifunction Printer Service Manual
Print-Quality Troubleshooting
Blank Print (No Print)
The entire image area is blank.
Initial Actions
■
Check the paper transfer path.
■
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Transfer Unit, PL4.1.1
■
Laser Unit, PL5.1.12
■
Print Cartridge (C/M/Y/K),
PL5.1.17-20
■
Dispenser, PL5.2.10
■
HVPS, PL5.2.15
■
Scanner Controller Board, PL9.1.1
■
Image Processor Board, PL9.1.20
■
MCU Board, PL9.2.13
■
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Perform Test Print (Cyan 20%,
Magenta 20%, Yellow 20%, and
Black 20%):
Service Mode > Printer
Diag > Test Print .
2. Does the error still occur when
printing?
Go to step 6. Go to step 2.
2 1. Perform a copy job.
2. Does the error still occur when
copying?
Go to step 3. Complete.
3 Does the document on the ADF or
document glass have incorrect face
up? Place the
document in the
correct position. Go to step 4.
4 1. Check the Scanner Controller Board
wiring harness connectors P/J64
and P/J65. Reseat the connectors.
2. Does the error still occur?
Replace the ADF
Scanner
Assembly
(page 8-103).
Go to step 5. Complete.
Blank Print