Xerox Phaser 6128 MFP, Руководство по обслуживанию

Страница: 284 / 606

4-14 Phaser 6128MFP Service Manual
General Troubleshooting
Parameter Parameter These functions read and write
parameters stored on the Image
Processor Board. Run this to
configure Scanner values manually.
Continue
Illegal
■
Clear - delete data
■
Transmit - contents of
memory.
Specifies how to handle the
document data when the
transmission queue overflows
memory.
Thresh
Memory RX
(%) Sets the percentage of memory
reserved when data is received.
When the remaining memory
amount falls below this threshold,
data reception is denied. Values
range from 0 to 100. The smaller the
value, the larger data storage
capacity becomes.
Thresh
Immediate
(%) Sets the remaining memory
threshold that triggers immediate
output. Immediate output refers to
an automatic image output to
accommodate incoming data that
exceeds memory capacity.
Values range from 0 to 99. The larger
the value, the sooner the immediate
output is initiated.
Thresh
Memory TX
(%) Sets the percentage of memory
reserved when data is sent. Values
range from 0 to 100. The smaller the
value, the greater the available
memory for scanned documents.
Thresh GC (%) Sets the remaining memory amount
in the Flash file system for image
data storage that triggers garbage
collection.
Page Margin 1
(mm) Sets the page margin that allows a
larger-than-standard size document
to be handled as a standard size
document. The document is reduced
to the standard size by the set value.
Values range from 0 to 127. When
the value is 10, the margin is 10 mm.
Valid when the Discard Size setting
in Fax Setting is "Off"
Test Control Panel Display Test Description