Configuring the Network Address
Phaser® 6125 Color Laser Printer
3-5
Configuring the Network Address
This section includes:
■
TCP/IP and IP Addresses
on page 3-5
■
Automatically Setting the Printer’s IP Address
on page 3-5
■
Dynamic Methods of Setting the Printer’s IP Address
on page 3-6
■
Manually Setting the Printer’s IP Address
on page 3-7
TCP/IP and IP Addresses
If your computer is on a large network, contact your network administrator for the appropriate
TCP/IP addresses and additional configuration information.
If you are creating your own small Local Area Network or connecting the printer directly to
your computer using Ethernet, follow the procedure for automatically setting the printer’s
Internet Protocol (IP) address.
PCs and printers primarily use TCP/IP protocols to communicate over an Ethernet network.
With TCP/IP protocols, each printer and computer must have a unique IP address. It is
important that the addresses are similar, but not the same; only the last digit needs to be
different. For example, your printer can have the address 192.168.1.2 while your computer has
the address 192.168.1.3. Another device can have the address 192.168.1.4.
Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically programs an IP address into every PC and printer on the network that is
configured to use DHCP. A DHCP server is built into most cable and DSL routers. If you use a
cable or DSL router, see your router’s documentation for information on IP addressing.
See also:
Online Support Assistant at
www.xerox.com/office/6125support
Automatically Setting the Printer’s
IP Address
If the printer is connected to a small established TCP/IP network without a DHCP server, use
the installer on the
Software and Documentation CD-ROM
to detect or assign an IP address to
your printer. For further instructions, insert the
Software and Documentation CD-ROM
into
your computer’s CD-ROM drive. After the Xerox Installer launches, follow the prompts for
installation.
Note:
For the automatic installer to function, the printer must be connected to an established
TCP/IP network.
