Xerox Phaser 4600, Руководство по обслуживанию, Страница: 354 / 405

5/2011
6-28 Phaser 4600/4620 Printer Service Manual
dC131
Revision - Xerox Internal Use Only General Procedures/Information
08-140 Tray 3 Pick Roller
life page counter Number of Tray 3 sheets since
last reset. Read only. Current count None
08-150 Tray 4 Pick Roller
life page counter Number of Tray 4 sheets since
last reset. Read only. Current count None
08-160 Tray 5 Pick Roller
life page counter Number of Tray 5 sheets since
last reset. Read only. Current count None
08-170 Tray 6 Pick Roller
life page counter Number of Tray 6 sheets since
last reset. Read only. Current count None
Table 3 NVM Chain 9
Location NVM Name NVM Description Value Default
09-100 LD Light Level 600dpi laser light level. Value
in PWM. 200 ~ 600 350
09-110 MHV Control
Bias Control Main charge bias control.
Basic of value (HVPS setting
is value). Value in PWM. 108 ~145 126
09-120 THV Control Bias
Control Transfer bias control. Basic
of value (HVPS setting is
value). Value in PWM. 41 ~ 220 76
09-130 Deve Bias Con-
trol Developer bias control. Basic
of value (HVPS setting is
value). Value in PWM standard
voltage: -500V (PWM 522). 408 ~ 607 522
09-140 Detack Bias Con-
trol Detack bias control. Basic of
value (HVPS setting is
value). Value in PWM standard
voltage: -1800V 80 ~ 160 123
09-150 Altitude Adjust-
ment Altitude adjustment in
meters. Current setting None
09-200 Drum Life Page
Counter Drum life count since last reset.
Read only. Current count. None
09-210 Toner Cartridge
Life Page Count Toner Cartridge life count since
last reset. Read only. Current count None
09-220 Drum life Time Drum rotation time in minutes.
Read only. Current count None
09-230 Transfer Roller
Life Page Count Transfer Roller life count since
last reset. Read only. Current count None
09-300 Dot Count Dot count value of consecutive
printing. Read only. One page dot count.
Table 4 NVM Chain 10
Location NVM Name NVM Description Value Default
10-100 StandBy Temper-
ature Offset Target temperature during
standby mode. 0 ~ 15 (4 steps / 5
degree intervals) 10
Table 2 NVM Chain 8
Location NVM Name NVM Description Value Default
10-105 Run Tempera-
ture Offset Target temperature during
run mode. 0 ~ 15 (3 steps / 5
degree intervals) 5
10-115 101-185 mm
Temperature Off-
set Offset temperature required on
thermistor B for paper width. 0 ~ 15 (4 steps / 5
degree intervals) 5
10-120 186-216 mm
Temperature Off-
set Offset temperature required on
thermistor B for paper width. 0 ~ 15 (4 steps / 5
degree intervals) 5
10-125 60gms Tempera-
ture Offset Media weight offset for heat roll
temperature. 0 ~ 15 (4 steps / 5
degree intervals) 5
10-130 90gms Tempera-
ture Offset Media weight offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-135 Bond Tempera-
ture Offset Media weight offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-140 Transparency
Temperature Off-
set Media type offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-145 Cardstock Tem-
perature Offset Media weight offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-150 Envelope Tem-
perature Offset Media type offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-155 label Tempera-
ture Offset Media type offset for heat roll
temperature. 0 ~ 10 (3 steps / 5
degree intervals) 5
10-200 Fuser Life Page
Counter Fuser life count since last reset.
Read only. Current count None
10-210 Heat Roller Life
Page Counter Heat Roller life count since last
reset. Read only. Current count None
10-220 Pressure Roller
Life Page
Counter Pressure Roller life count since
last reset. Read only. Current count None
10-300 Pick-up Interval
Delay Change the time interval for
paper pick-up. 0 ~ 100 (* 100 msec ) 0
10-310 Pick-up Interval
Delay (Special) Change the time interval for
special media pick-up. 0 ~ 100 (* 100 msec ) 0
Table 4 NVM Chain 10
Location NVM Name NVM Description Value Default