manualshive.com logo in svg

Xerox Phaser 4600, Руководство по обслуживанию

"Xerox Phaser 4600 - высокопроизводительный принтер, предназначенный для крупных офисов и предприятий. Дополнительное руководство доступно для загрузки бесплатно на нашем сайте. Получите дополнительный мануал и узнайте как использовать этот принтер максимально эффективно." manualshive.com.

Поделиться
Скачать
background image

5/2011

6-6

Phaser 4600/4620 Printer Service Manual

GP 4, GP 5

Revision - Xerox Internal Use Only

General Procedures/Information

GP 4 Reports

Purpose

To list reports available from the printer’s Control Panel, refer to 

GP 3

 and 

GP 9

.

•

Configuration report

•

Supplies Usage page

•

Usage Profile

•

PostScript Font List

•

PCL Font List

•

Last 40 Error Messages

•

Call for Assistance

Configuration Report

The Configuration Report lists the current state of system configuration parameters including
installed options and network settings.

Supplies Usage

The Supplies Usage report includes the current status of printer consumables and routine
maintenance items. Life counts, installation dates and replacement part numbers are listed for
all items.

Usage Profile

The Usage Profile report lists page counts, coverage, and billing meter totals. 

PostScript Font List

This report provides a list of the installed PostScript fonts.

PCL Font List

This report provides a list of the installed PCL fonts.

Last 40 Error Messages Report

This report lists the chain-code, error message, and date of the last 40 errors.

Customer Assistance

This report provides basic system and maintenance information including consumables, sys-
tem model and serial numbers, page counts, and installed options.

GP 5 Firmware Upgrade

Purpose

Procedure to upgrade system firmware.

•

Remote procedure

•

Local procedure

Remote Upgrade

There are 2 methods to upgrade the firmware on networked machines, CentreWare Internet
Service (CWIS) and CentreWare Web.

NOTE: CentreWare Web can only be used by the System Administrator.

Use this procedure to upgrade system firmware from CWIS:

1.

Open Microsoft Internet Explorer. Enter the machines IP address.

2.

Enter the machines IP address. Press return. The CentreWare Internet Services window
will open.

3.

Click on the Properties tab.

4.

In the Properties window, click on Maintenance, then Firmware Upgrade.

5.

Enter the customers username and password. The Firmware Upgrade window will open.

6.

In the Firmware Upgrade window, select Browse.

7.

Browse to the location of the firmware files. Select the correct firmware file.

8.

Select Install Software. The firmware file will now be transmitted to the machine. The
machine will automatically initialize when the upgrade procedure is finished.

9.

Check that the machine has been successfully upgraded.

Local Upgrade

The firmware upgrade is initiated at the Control Panel from a USB thumbdrive through the
standard thumbdrive port.

Use this procedure to upgrade system firmware through the USB port on the Front Cover.

1.

Load the firmware onto a USB thumbdrive.

2.

Connect the USB thumbdrive to the standard thumbdrive port on the front of the machine.

3.

Select Print from USB.

4.

From the displayed list, navigate to the relevant firmware file. Select the firmware file.

5.

Select Add. The firmware file will be added to the print list.

6.

Select Done. The print list will be displayed.

7.

Select the firmware file to be downloaded to the machine. Press OK to send the firmware
file to the machine.

NOTE: The progress of the upgrade procedure will be displayed on the UI. The machine
will reboot after the upgrade.

8.

After the firmware has been upgraded, check that the correct version appears on the Con-
figuration page. Refer to 

GP 4

 Reports.

Содержание Phaser 4600






















































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Phaser 4600

Canon imagePROGRAF iPF760 Setup Manual preview
imagePROGRAF iPF760
Бренд: Canon Страницы: 12
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Setup Manual preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Бренд: Canon Страницы: 16
Canon imagePRESS C850 Practical Manual preview
imagePRESS C850
Бренд: Canon Страницы: 146
Canon imagePRESS C850 Quick Manual preview
imagePRESS C850
Бренд: Canon Страницы: 63
Canon imagePROGRAF iPF760 Basic Manual preview
imagePROGRAF iPF760
Бренд: Canon Страницы: 132
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Technical Documents preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Бренд: Canon Страницы: 8
Canon imagePROGRAF TX-2000 Introductory Information preview
imagePROGRAF TX-2000
Бренд: Canon Страницы: 14
Canon i-SENSYS MF6180dw Manual preview
i-SENSYS MF6180dw
Бренд: Canon Страницы: 1040
Canon imagePROGRAF iPF815 Basic Manual preview
imagePROGRAF iPF815
Бренд: Canon Страницы: 48
Canon imageRUNNER 1025 Manual preview
imageRUNNER 1025
Бренд: Canon Страницы: 6
Canon imageRUNNER 2230 Specification preview
imageRUNNER 2230
Бренд: Canon Страницы: 6
Canon IMAGEPRESS C7010VPS Operating Information Manual preview
IMAGEPRESS C7010VPS
Бренд: Canon Страницы: 388
Canon imagePRESS C1 Installation Procedure preview
imagePRESS C1
Бренд: Canon Страницы: 56
Canon imagePROGRAF iPF8300 Basic Manual preview
imagePROGRAF iPF8300
Бренд: Canon Страницы: 24
Canon imagePROGRAF iPF8300 Brochure preview
imagePROGRAF iPF8300
Бренд: Canon Страницы: 4
Canon imagePROGRAF iPF6350 Setup Manual preview
imagePROGRAF iPF6350
Бренд: Canon Страницы: 12
Canon imagePROGRAF iPF6350 Specifications preview
imagePROGRAF iPF6350
Бренд: Canon Страницы: 2
Canon imageCLASS MF8380Cdw Basic Operation Manual preview
imageCLASS MF8380Cdw
Бренд: Canon Страницы: 192

Бренды по названию

Популярные бренды

Загрузить еще бренды