9. Slide the metal rod located above the developer roller away
from the remaining end cap to free it from the end caps.
10. Remove the toner hopper from the frame.
11. On the waste hopper, remove the gold colored screw from
the drum axle. Work the waste section away from the frame.
12. Remove the waste section from the frame.
XEROX PHASER 3600
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com