21. Install the drum and drum axle (large gear to the non-gear side of the PCR).
Slide the drum axle through the large gear side. Keep the conductive grease to the large gear side.
Place the waste hopper aside.
22. On the toner hopper, remove the large black gear and
small white gear from the developer roller shaft.
23. Slide out the metal bar.
XEROX PHASER 3600
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com