REPETITIVE DEFECT CHART
PCR:
38 mm
Developer roller:
50 mm
Supply roller:
42 mm
Transfer roller
56 mm
OPC drum:
94 mm
Upper fuser roller:
126 mm (mark on the front of the page)
Lower fuser roller:
126 mm (mark on the back of the page)
PRINTING TEST PAGES
1. Press the MENU button until INFORMATION appears on the display.
2. Press OK.
3. Press the UP or DOWN arrow until the desired test page appears on the display.
Some options are the INFORMATION page and DEMO page appear.
RUNNING THE CARTRIDGE CLEANING PAGE
1. With the printer at READY, press the MENU button and select SYSTEM SETUP>MAINTENANCE>CLEAN DRUM.
2. Select PRINT>YES.
3. The cleaning page will run.
RUNNING THE FUSER CLEANING PAGE
1. With the printer at READY, Press the MENU button and select SYSTEM SETUP>MAINTENANCE>CLEAN FUSER
2. Select PRINT>YES.
3. The fuser page will run.
XEROX PHASER 3600
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com