Xerox Phaser 3450 Скачать руководство пользователя страница 82

Страница: 82 / 155

7-7

TROUBLESHOOTING

Service Manual

7.1.13 Satins on Back of Page

• Description

The back of the page is stained at 57 or 92 mm intervals.

Digital Printer

82 or 92 mm

Check and Cause

Solution

1. 57mm : Transfer roller is contaminated.

2. 92mm : Pressure roller is contaminated.

1. Perform the OPC Cleaning Mode Print 2 or

3 times. Run Self-Test to remove the conta-
mination of the transfer roller.

2. Replace the transfer roller if contaminated

severely.

3. Disassemble the fuser and clean the

H/R(Heat Roller) and P/R(Pressure roller).
And check the area between H/R and
Thermistor. If contaminated, clean the area
not to be deformed.

7.1.14 Blank Page Print out (1)

• Description

Blank page is printed.

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

Check and Cause

Solution

Bad ground contacts in OPC and/or toner
cartridge.

Remove contamination of the terminals of the
toner cartridge and the unit.

7.1.15 Blank Page Print out (2)

• Description

1. Blank page is printed.
2. One or several blank pages are printed.
3. When the printer turns on, several blank pages print.

Check and Cause

Solution

1. Bad ground contacts in OPC and/or toner

cartridge.

2. Abnormal solenoid.

1. Remove contamination of the terminals of

the toner cartridge.

2. Perform the engine self test using EDC Mode to

check if the Solenoid is normal.

3. If not solved by the above directions 1-2,

Replace the engine board.

4. Turn the power off, delete the data of PC

and try printing again.

Содержание Phaser 3450




























































































































































Результаты поиска

Содержание Phaser 3450

Отзывы:

Xerox Phaser 3450, Руководство по обслуживанию, Страница: 82 / 155

Результаты поиска

Содержание Phaser 3450

Отзывы: