Xerox Phaser 3450 Скачать руководство пользователя страница 79

Страница: 79 / 155

7-4

TROUBLESHOOTING

Service Manual

7.1.7 Uneven Density

• Description

Print density is uneven between left and right.

Check and Cause

Solution

1. The pressure force on the left and right

springs of the transfer roller is not even,
the springs are damaged, the transfer
roller is improperly installed, or the trans-
fer roller bushing or holder is damaged.

2. The life of the Toner cartridge has

expired.

3. The toner level is not even on the toner

cartridge roller due to the bad blade.

1. Replace both the left and right Spring

Holder.

2. Occur in the toner cartridge, replace the

toner cartridge and try to print out.

7.1.8 Background

• Description

Light dark background appears in whole area of the printing.

Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer

Check and Cause

Solution

1. Does character exist less than 2%

per a page, and hasn’t it been used
long time?

2. Is a recycled toner cartridge be

used?

3. Has the life span of the toner car-

tridge ended?

4. Is the movement(Up and Down) of

the transfer roller smooth?

5. Is the HVPS normal?

1. The toner cartridge is basically

designed to print 8,000 sheets with
5% image. If it prints more than
12,000 sheets with 2% coverage, a
background can occur.

2. The B/S is not guaranteed if using a

recycled the toner cartridge.

3. Replace the toner cartridge when the

life span of it has been ended.

4. Clean the bushing part of the transfer

roller.

5. If the problem is still not solved,

replace the toner cartridge.

Содержание Phaser 3450




























































































































































Результаты поиска

Содержание Phaser 3450

Отзывы:

Xerox Phaser 3450, Руководство по обслуживанию, Страница: 79 / 155

Результаты поиска

Содержание Phaser 3450

Отзывы: