manualshive.com logo in svg

Xerox Phaser 3450, Руководство по обслуживанию, Страница: 56 / 155

Поделиться
Скачать
Xerox Phaser 3450 Скачать руководство пользователя страница 56

6

6

6-1

Alignment & Adjustments

Service Manual

6. Alignment and Adjustments

This chapter describes the main functions for service, such as the product maintenance
method, the test output related to maintenance and repair, DCU using method, Jam removing
method, and so on.  It includes the contents of manual.

6.1 How to use EDC (Engine Diagnostic Control) Mode 

6.1.1 EDC Setup

• EDC(Engine Diagnostic Control, EDC will be used below) is considered to test and check whether each functions of

machinery and h/w module are normal or not. All of the test function are able to be controlled by the keys and LCD
window on the panel without any other kits.

• It’s developed for related engineers, not for users.

6.1.2 Entering/Exiting Method For EDC

<1> Outline

• The method for entering  “EDC” mode is especial because it is intended for technicians and not users
• After Entering the mode, the message, “Engine EDC Mode” is displayed.
• On the mode, an engineer should press the “Menu Key” to search each function he would like to test.
• Turn the power off, after the test is entirely end.

<2> Usage

1. Power off the printer.
2. Pressing the “Select key”, power the printer on.
3. Keep pressing it until the message, “Engine EDC Mode” is shown on the panel.
4. Follow the usage for a function you would like to use.
5. Turn the power off, after the test is complete.

6.1.3  Usage & Function of Key on OPE

6.1.4  Usage & Function of LCD

Key

Function

Description

Remarks

Menu

Menu

To enter the main Menu

Arrow (right)

Search a Menu/ Input Data

To search a Menu and input a data

Arrow (left)

Search a Menu/ Input Data

To search a Menu and input a data

Select

Execute / Select 

To execute a function

Cancel

Stop / Cancel

To stop a function

Upper Level

Move

To move to the upper level

Line

Characters

Description

Remarks

Top

16

Make engineers recognizing a test location.

[Main Menu] or [Function] is displayed.

Bottom

16

Make engineers recognizing a menu or function to be tested

A menu or function name displayed

Содержание Phaser 3450




























































































































































Отзывы:

Нет отзывов