![background image](http://html1.mh-extra.com/html/xerox/phaser-3100mfp-s/phaser-3100mfp-s_user-manual_3307357021.webp)
Phaser 3100MFP/S
- 17 -
2 - Installation
Packaging contents
The packaging contains the items listed below:
Multifunction device
1 print cartridge
1 Safety guide and 1 Installation guide
1 PC installation CD ROM
1 power cord
1 USB cord
Device installation
1
Unpack the device.
2
Install the device adhering to the security notices
stated at the beginning of this booklet.
3
Remove all tape from the machine.
4
Remove the plastic protection film from the screen.
Paper tray installation
Your machine supports a number of sizes and types of
media (refer to
Specifications
, page 50).
1
Remove the paper tray completely
.
2
Push the lower panel down until it clicks.
3
Setup the back side tray stop by pushing the
"PUSH" level (
A
).
Then adjust the side paper guides to the paper size
by pushing lever (
B
) located on the left side guide.
Adjust the length paper guide to the paper size by
Important
Before loading paper, refer to the
paragraph
Paper
recommendations
, page 13.
Important
You can use paper weighing
between
60
and
105
g/m2.