Xerox Nuvera 100, Руководство по планированию установки

Страница: 50 / 124

6 - 2
Installation Planning Guide
Printer requirements and specifications
Outlet configurations
This section discusses specifications for printer outlets and the
required wall outlet configurations for the USA / Canada and
internationally.
NOTE: All power outlets must be dedicated to this equipment.
When determining the electrical connections for your printer, make
sure that:
a) Each power cord has a separate circuit
b) The printer power cord configurations match your receptacle
c) Your electrical outlets are within the required specifications
50 Hz systems: Ensure that power connections are per local
codes/regulations.
60 Hz printer outlet voltages
The following table shows the voltages for the outlets on your
printer. All power outlets must have a dedicated circuit for each
system equipment piece. Make sure each power cord has a
separate circuit.
Table 6-2 Printer (60Hz) voltage requirements at power outlet
Printer power outlet
and cord voltage
configurations–
60 Hz
The following figures shows the 60 Hz power outlet configuration
for 50 amp NEMA 14-50R and 30 amp NEMA 14-30R. Voltage to
ground is shown for troubleshooting purposes.
Service outlet
configuration
Measurement of
wiring Nominal Range
4 Wire Line 1 to neutral 120 V RMS 107-127 V RMS
4 Wire Line 2 to neutral 120 V RMS 107-127 V RMS
4 Wire Neutral to ground 0 0-10 V RMS
4 Wire Line 1 to line 2 208 V RMS 182-220 V RMS
4 Wire Line 1 to line 2 240 V RMS 210-254 V RMS