![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_installation-planning-manual_3382809067.webp)
Installation Planning Guide
6- 19
Printer requirements and specifications
For your reference, two degrees represents a height discrepancy
of approximately 3.8 inches / 9.6 cm measured at the casters with
the printer tilting from left to right, or approximately 0.7 inches / 1.8
cm with the printer tilting from back to front.
If you move the printer after its initial installation, it is your
responsibility to make sure that the printer can be leveled properly.
If you do not have the leveling kit (the printer in its initial location
did not require it), and you need one to level the printer in a new
location, contact your Xerox site representative to
obtain one.
Delivery access requirements
It is easy to overlook the path required to move the equipment
from the truck to the operation site. To determine access, ask the
following questions:
•
Does the equipment need to go up or down a stairwell? How
wide is the stairwell?
•
Do you have an elevator, if the equipment is to be located
above or below the first floor?
•
Is the elevator large enough for the equipment?
•
How wide are the hallways and doorways?
•
Do you have a loading dock or a specific door to which the
equipment should be delivered?
You need to review these issues before or during the site
inspection conducted by your service representative.
The equipment dimensions are specified earlier in this chapter, so
it is easy to determine whether your hallways and doorways are
wide enough to permit access.
Turning radius
You must also consider the width of the passageway when the
equipment must negotiate a corner, whether into a room, an
elevator, or another passageway.
There are L-shaped turns and T-shaped turns. The diagrams and
the tables that follow show the minimum space required to
maneuver through the turns.
Содержание Nuvera 100
