Xerox Nuvera 100, Руководство по планированию установки

Страница: 13 / 124

Installation Planning Guide
xi
Introduction
This document helps you prepare for delivery and installation of
your new Xerox DocuPrint printing system.
About this guide
This guide is intended for the person responsible for coordinating
the installation of the Xerox DocuPrint 100/115/135/155/180
Enterprise Printing System at your site. It lists the tasks you must
complete before installation can begin, as well as your
responsibilities during the installation. This guide is a companion
to the Getting Ready for Installation manual.
NOTE: All information in this guide, unless otherwise stated,
pertains to the Xerox DocuPrint 100/115/135/155/180 EPS
printers.
The Installation Planning Guide is one of several manuals that are
available for your new printing system. You receive it in advance
of hardware delivery to help you prepare your site for the delivery
and installation of the system. A set of user material will be
delivered with the system.
Before using this guide, become familiar with its contents and
conventions.
Contents
This guide contains the following:
• Chapter 1, “Product overview,” provides an overview of the
Xerox DocuPrint 100/115/135/155/180 Enterprise Printing
System.
• Chapter 2, “Controller components and options,” describes
controller hardware, software, and options.
• Chapter 3, “Printer components and options,” describes
printer components, configurations, and options.
• Chapter 4, “Preparing for installation,” provides a checklist of
tasks that must be accomplished before the installation. It also
explains connectivity requirements for submitting documents
from the host or client to the printing system.
• Chapter 5, “Controller requirements and specifications,”