Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 40 -
Multifunction Finisher: Professional and Pro Plus
Two configurations are offered – Professional and Pro Plus (available on the 100 & 120 ppm
configurations only)
Professional Finisher
Top Tray / Offset Stacker / Stapler / Booklet Maker / Z-fold / C-fold
•
Envelopes and Statement size paper (5.5” x 8.5”) will be delivered only to the top tray.
•
Staple locations for non-standard size papers (e.g., standard sizes are A4, Letter size, etc.) will be
slightly asymmetrical. The staple will be located in the position appropriate for the next nearest
standard paper size.
•
Certain stocks (stocks with high clay content and / or composed of other high density materials)
may reduce the number of sheets that can be stapled and / or result in miss-staples
.
•
Imposition at the printer requires the optional Imposition feature license
Sub-system Feature
Comments
Top Tray
250 sheet capacity (20 lb. bond)
5.5” x 8.0” to 12.8” x 18.5”
Main Stacker
2000 sheet capacity
5.83” x 8.0” to 12.8” x 18.5”
•
Output is normally delivered 1-n, face down
to the main tray; jobs can be programmed
for face up delivery if desired but stapling
position & orientation will not be optimal
•
The system will cycle down when the
stacker is full; overflow will not go to the top
tray
•
Sizes can be mixed in the stacker, however
mixed size stacks should be closely
monitored to ensure stack stability
•
The maximum stack size capability is
degraded for thin stapled sets.
Stapler
•
Staples up to 100 sheets 20 lb. bond of paper
sized 8.5” x 14” or less with 100 sheet staple
cartridge loaded. With 11” x 17” / A3 20 lb.
Bond paper, up to 50 sheets can be stapled.
•
Staples up to 50 sheets 20 lb. bond paper sized
11” x 17” / A3 or less with 50 sheet staple
cartridge loaded
•
One or Two Staples
•
The number of sheets that can be stapled
will decrease in relationship to the weight of
the paper.
•
Does not staple tabs or transparencies
•
The staple placement on the page is shown
on the controller
Booklet maker
•
C – fold
1 sheet Letter and A4 sizes
•
Z – fold
1 sheet Letter and A4 sizes
•
Bi – fold
5 sheet capacity (20 lb. stock), Letter (8.5” x
11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
14”), Ledger (11” x 17”) and A3 sizes.
•
Booklets – Dual Staple
15 sheet capacity (20 lb. stock), Letter (8.5” x
11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
14”), Ledger (11” x 17”) and A3 sizes.
•
C - fold and Z- fold weight range is 16 to 32
lb. (60 to 120 gsm)
•
Bi-fold & Booklet sheet capability is reduced
with heavier stocks
•
No face trim
•
No Engineering folder
•
No hole punch
