Xerox Legacy 4110 Скачать руководство пользователя страница 503

Страница: 503 / 520

Xerox 4590/4110 Copier/Printer User Guide

13-7

13. Safety information and Notices

Notices

Radio frequency emissions

FCC in the USA

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

Federal Communications Commission (FCC) Rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his/her

own expense.
Changes or modifications to this equipment not specifically

approved by the Xerox Corporation may void the user’s authority

to operate this equipment.

WARNING:

Shielded cables must be used with this equipment to

maintain compliance with FCC regulations.

In Canada (ICES-003)

This Class “A” digital apparatus complies with Canadian ICES-

003.
Cet appareil numérique de la classe “A” est conforme á la norme

NMB-003 du Canada.

Regulatory information for RFID

This product generates 13.56 MHz using an Inductive Loop

System as a Radio Frequency IDentification system device

(RFID). This system is certified in compliance with European

Council Directive 99/5/EC and applicable local laws or regulations

as applicable.

Содержание Legacy 4110









































































































































































































































































































































































































































































































































Результаты поиска

Содержание Legacy 4110

Отзывы:

Бренды по названию

Популярные бренды

Xerox Legacy 4110, Руководство пользователя

Результаты поиска

Содержание Legacy 4110

Отзывы:

Бренды по названию

Популярные бренды