Xerox Legacy 4110, Начало работы, Страница: 6 / 54

Xerox 4590 EPS/4110 EPS Getting Started 1-2
1. Overview
No. Component Function
1 DocuSP Controller The DocuSP Print Services software that provides a graphical user interface
(GUI) to the printer for
setting up and printing jobs, setting up the printer,
controlling system-level preferences, and managing fonts, security,
accounting, and many other activities.
2 User Interface The User Interface (UI) is attached to the machine and consists of the Control
Panel and the Touch Screen. Refer to “User Interface (UI)” in this chapter.
3 Power switch Switches on/off the machine power.
4 Front cover Open this cover to clear paper jams and to replace the waste toner bottles.
5 Left cover Open this cover to replace the toner cartridge.
6 Tray 1, 2, 3, 4 Contains the media used for print output.
7 Locking casters Locks the wheels of the machine. Lock these casters after moving the machine
to its installation site.
8 Bottom left cover Open this cover to remove paper jams.
9 Front cover for the
optional Trays 6, 7
Open this cover to access the bottom left cover. This cover and Trays 6 and 7
are part of the optional High Capacity Feeder (HCF).
10 HCF (Trays 6, 7) Optional High Capacity Feeder contains 2,000 sheets per tray for print output.
11 OHCF (Tray 6) Alternative to the 2-drawer HCF, the optional Oversized High Capacity Feeder
feeds oversized stock up to 13 x 19 in/SRA3 paper.
12 Tray 5 (Bypass) Load nonstandard paper (heavy stock or other special media) that cannot be
loaded in trays 1-4. It can be folded away when not in use and extended to
support longer length stock.