Xerox Legacy 4110, Начало работы, Страница: 21 / 54

Xerox 4590 EPS/4110 EPS Getting Started
3-1
3. Loading paper
About paper
Paper types in the trays
The machine automatically detects the size and orientation of
loaded paper in the paper trays. The paper type, however, must
be set. Normally, plain paper type is set as the default for each of
the trays. Change the paper type settings if you load other paper
types. Up to five paper types can be named and set as user-
defined paper.
Automatic paper size detection feature
When you load standard-sized paper in trays 3, 4, 6 and 7, the
size is automatically detected by the machine.
NOTE: Trays 1 and 2 are preset for paper size 8.5 x 11 inches.
The machine detects only that size in trays 1 and 2.
The paper type attribute is not automatically detected and must be
set. Normally, plain paper is set as the default for each of the
trays. Change the paper type settings if you load other paper
types. Up to five paper types can be named and set as user-
defined paper.
Automatic tray selection
The machine automatically selects a paper tray that corresponds
to your document size and orientation if the following conditions
exist:
•
You are using Printer Command Language (PCL) print drivers,
and
• You select Paper Tray on the Paper/Output tab
This is called
Automatic Tray Selection
.
NOTE: Tray 5 (Bypass) cannot be used with Automatic Tray
Selection.