Xerox Legacy 4110, Начало работы, Страница: 10 / 54

Xerox 4590 EPS/4110 EPS Getting Started 1-6
1. Overview
NOTE: Throughout this guide, Finisher D2 and Booklet Finisher
may be referred to simply as the finisher.
No. Component Function
19 Post-process inserter
(Tray 8)
Loads and inserts offset and color documents, preprinted tabs, covers, or
transparency separators.
20 Decurl button For lighter weight paper especially, press this button to decurl the output.
21 Output tray Prints are delivered here when specific output features are selected, such as
Automatic sorting, Collated, Uncollated or Normal.
22 Finisher tray Receives prints when you select Stapled, Punched and Z-folded.
23 Booklet output tray Receives prints when you select Bi-Fold or Bi-Fold + Stapling.
24 Booklet output tray
button
Press this button to deliver and retrieve booklets from the output area.
25 Right cover Open to clear paper jams, replace staples, clear jammed staples or remove
the scraps from the puncher.
26 Staple cartridges for
booklet
There are two staple cartridges for booklets. Remove this cartridge to replace
staples and clear staple jams.
27 Staple cartridge Contains staples. Remove this cartridge to replace staples and clear staple
jams.
28 Staple waste
container
Collects the staple wire cuttings from the 4 staple cartridges. Open to remove
and replace the waste container.
29 Punch scrap
container
Collects the scraps from the puncher. Open to remove the scraps.
30 Tri-Fold output tray
(optional)
Receives prints when you select Tri-Fold In or Tri-Fold Out.
31 Left cover Open this cover to access the machine and to clear paper jams.
32 Tri-Fold output tray
button
Press this button to open the Tri-Fold output tray.