Xerox Legacy 4110, Начало работы, Страница: 26 / 54

Xerox 4590 EPS/4110 EPS Getting Started 3-6
3. Loading paper
2. Load and align the edge of the paper against the left edge of
the tray with the side to be printed on facing up.
KEY POINT:
Do not load paper above the MAX line.
3. Gently push the tray in until it stops.
Load paper in the optional Oversized High Capacity Feeder (Tray 6)
1. Pull out the tray towards you until it stops.
WARNING:
When pulling out the paper tray, do it slowly. If pulled
out with too much force, the tray can hit and injure your knees.
2.
Squeeze the handle on the paper guide (A) and slide the
guide to the desired paper size. Squeeze the handle on the
paper guide (B) and slide the guide to the desired paper
size.
3. Fan the sheets before loading them into the tray. With the
side to be printed on facing up, load and align the paper
stack in the lower right corner of the tray as shown below.