Xerox DocuPrint 96MX, Руководство по созданию форм, Страница: 52 / 164

FORMS DESCRIPTION LANGUAGE
3-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
Example 3 AT 2 DRAW 5 VERTICAL LINES FROM 5 TO 10 AND REPEAT
EVERY 2;
This command specifies the drawing of five vertical lines. The first
line begins two horizontal grid units to the right of the form origin and
five grid units down from the form origin, and ends ten grid units down
from the form origin. This line is repeated every two horizontal grid
unit intervals, as shown in figure 3-10.
Figure 3-10. Drawing parallel vertical lines
Example 4 AT 4 DRAW 5 LINES FROM 2 TO 4 AND REPEAT HORIZONTALLY
EVERY 4;
This command specifies five short lines to be drawn, each two grid
units long, with each starting point spaced four grid units apart and
separated two grid units from the end of the preceding line, as shown
in figure 3-11.
Figure 3-11. Drawing repeated horizontal lines