Xerox DocuPrint 96MX Скачать руководство пользователя страница 118

Страница: 118 / 164

FDL-GENERATED MESSAGES

B-2

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE

FD2740

FSL NOT FOUND OR INVALID OPTION. CHECK
AND RETRY.

The specified forms source library (FSL) file does not
exist on the system disk or the option is invalid.
Compiler aborts.

1. Check for correct file name.

2. Create FSL file on disk if necessary. (Refer to

the “Editor” chapter in your

DocuPrint 96/

DocuPrint 96MX LPS Operations Reference.

3. Retry FDL task.

FD2915

SECURITY VIOLATION.

Requested file has been protected by ABNORMAL
SECURITY = YES command. Attempt was made to
access it at wrong logon level. To access file, obtain
correct password and log on at Level 5. (Refer to
your

DocuPrint 96/DocuPrint 96MX LPS Operations

Reference.)

FD4500

ERROR IN READING MAGNETIC TAPE

System is unable to read input tape containing FDL.
Compiler aborts.

1. Clean tape drive. (Refer to the “Maintenance”

chapter in your

DocuPrint 96/DocuPrint 96MX

LPS Operator Guide

2. If problem recurs, remake FDL tape.

FD8500

STACK UNDERFLOW.

Forms compiler software error has occurred.
Compiler will abort

1. Retry compiling

2. If message reappears, call your system support

representative.

FD9400-
FD9540

Disk/file error messages

System is unable to access (read, write, open, or
close) indicated file due to problem with disk. Forms
compiler will abort.

1. Retry entry. Message should not reappear if

failure was intermittent memory error.

2. If problem persists, call your system support

representative.

FD9400

ERROR IN CLOSING THE SOURCE-INPUT FILE

FD9410

ERROR IN CLOSING THE SOURCE-OUTPUT FILE

FD9420

ERROR IN CLOSING THE LISTING/SUMMARY FILE

FD9430

ERROR IN OPENING THE SOURCE/OUTPUT FILE

FD9440

ERROR IN OPENING THE LISTING/SUMMARY FILE

FD9450

ERROR IN READING THE SOURCE-INPUT FILE

FD9460

ERROR IN READING THE SOURCE-OUTPUT FILE

FD9470

ERROR IN READING THE SOURCE-OUTPUT FILE

FD9475

ERROR IN BACK-SPACING THE SOURCE-OUTPUT FILE

Содержание DocuPrint 96MX





































































































































































Результаты поиска

Содержание DocuPrint 96MX

Отзывы:

Xerox DocuPrint 96MX, Руководство по созданию форм, Страница: 118 / 164

Результаты поиска

Содержание DocuPrint 96MX

Отзывы: