Xerox DocuPrint 96MX Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 164

Xerox DocuPrint 96MX Скачать руководство пользователя страница 2

Xerox Corporation
701 S. Aviation Boulevard
El Segundo, CA 90245

©1998 by Xerox Corporation. All rights reserved.

Copyright protection claimed includes all forms and matters of
copyrightable material and information now allowed by statutory or
judicial law or hereinafter granted, including without limitation,
material generated from the software programs which are displayed
on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P85630

Xerox® and all Xerox products mentioned in this publication are
trademarks of Xerox Corporation. Products and trademarks of other
companies are also acknowledged.

Changes are periodically made to this document. Changes, technical
inaccuracies, and typographic errors will be corrected in subsequent
editions.

This document was created on a PC using Frame software. The
typeface used is Helvetica.

«
1
2
3
4
...
»

Содержание DocuPrint 96MX





































































































































































Отзывы:

Нет отзывов