Xerox DocuPrint 96MX, Руководство по созданию форм, Страница: 108 / 164

CODING A COMPLEX FORM
6-8 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
Compiling the form
This exercise gives you practice using most of the FDL commands
discussed throughout this guide.
The next step is to compile the FSL which produces a sample of the
form, provided there are no syntax errors. The summary statement
also prints whether or not there are errors.
After you have entered the END command, then SAVE, CLEAR, and
END the editing session. (Refer to your
DocuPrint 96/DocuPrint
96MX LPS Operations Reference for additional information.)
Note: CE is an abbreviation for CLEAR and END.
Do not be surprised if you inadvertently omit a semicolon or misspell
a word. The system indicates where the error occurred and you can
easily go back into the form and correct the error
If there are errors, proceed as follows:
At the
OS1000 READY FOR COMMANDS
message on the DocuPrint
96/DocuPrint 96MX keyboard display, enter:
EDIT 1STFRM.FSL
The FSL file is displayed. When you identify where the error
occurred, modify that record, then SAVE, CLEAR and END the
editing session. Since this FSL already exists, use the abbreviated
method to SAVE, CLEAR and END (SCE). For example:
When the form compiles error-free, your form prints successfully.
Figure 6-10 shows the complete FSL and the form it produces.
END;
SAVE 1STFRM.FSL
CE
FDL 1STFRM,TRA
END;
SCE
FDL 1STFRM,TRA