![background image](http://html1.mh-extra.com/html/xerox/docuprint-75/docuprint-75_software-manual_883381140.webp)
Specifying input parameters
2-32
Using LCDS Print Description Language
Syntax
[
ac
:] PCC ASSIGN = {(
byte
,
ccln
) | (
byte
, (
ccln
1
[,
ccln
2
] [, ...])}
Syntax for ccln definition:
{
field
1
[,
field
2
[,
field
3
]] | (
field
1
[,
field
2
[,
field
3
]] [, {TOF | OVR |
IGN}])}
Options
Default
No default
Table 2-33. PCC ASSIGN parameter options and definitions
Option
Definition
byte
The printer carriage control byte that is being defined. Its value is in the range 0 to 255
(X00 to XFF).
ccln
carriage control line number.
Specifies the action that should be taken when the printer carriage control byte defined
in the
byte
field is encountered.
A
ccln
consists of the following:
•
Space print parameters
This has the following components:
–
field
1 Specifies the carriage action to take before printing. (An example is the
ANSI carriage control.)
- SP
m
Space
m
lines before printing.
- SK
n
Skip to channel
n
before printing.
–
field
2 Specifies whether printing occurs for this record:
- P Print the output data at the line number computed after
field1
is
processed.
- N No printing occurs for this record (default).
–
field
3 Specifies the carriage action to take after printing. (An example is the
IBM1403 carriage control).
- SP
m
Space
m
lines after printing.
- SK
n
Skip to channel
n
after printing.
NOTE: Each of the three fields shown above is optional; however, you must
specify at least one field. The range for variables
m
and
n
is 0 to 15.
•
Bottom Of Form actions (optional)
–
TOF
When
spacing
causes bottom of form (BOF) to occur, instructs the system to
go to the top of form (TOF) on the next page and to stop spacing.
–
IGN
When
spacing
causes the bottom of form (BOF) to occur, instructs the system
to ignore it to continue spacing through the end of the physical page. The page
then transitions to top of form and spacing continues.
–
OVR (default)
When
spacing
causes bottom of form (BOF) to occur, instructs the system to
go to the top of form (TOF) on the next page and to continue spacing.
Содержание Docuprint 75
