![background image](http://html1.mh-extra.com/html/xerox/docuprint-75/docuprint-75_software-manual_883381174.webp)
Specifying input parameters
2-66
Using LCDS Print Description Language
Options
Default
80
VOLUME OPTIMIZE
Enhances the performance of the data stream.
NOTE: This parameter is supported only partially by the
FreeFlow Print Server LCDS systems. The parameter options
table below reflects only the options that are supported.
Syntax
VOLUME OPTIMIZE = {NCCHECK | NONE}
Options
VOLUME
OPTIMIZE
parameter: Point
to note
The NCCHECK option is supported for FreeFlow Print Server
LCDS systems only for Fuji Xerox markets. It is processed in
other markets as if NONE were specified.
Table 2-71. VOLUME MINLAB parameter options and definitions
Option
Definition
value
Specifies in bytes the maximum length of the smallest physical block. The
value can range from 1 to 4095 bytes. The specified value must be less than
the MAXLAB value and must not exceed the BLOCK LENGTH.
Table 2-72. VOLUME OPTIMIZE parameter options and definitions
Option
Definition
NCCHECK
NCCHECK
Disables channel 9 and channel 12 detection. When this option is selected. the
host is not notified by the printing system each time channel 9 or 12 is
recognized. Any skips to channel 9 or 12 are allowed as for any other channel.
NOTE: This option is supported on the FreeFlow Print Server LCDS systems
only for Fuji Xerox markets. All other DP systems process it as NONE.
NONE
No optimization actions are taken.
Содержание Docuprint 75
