Xerox DocuPrint 180, Руководство по генерации системы

Страница: 52 / 94

SYSGEN AND SYSGEN-RELATED PROCEDURES
4-24 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
9. For an online sysgen, Enter H (host) and
press <ENTER>.
Request the host operator to vary the
printing system online.
Notes:
You must use a host utility program to
advance the SST to the next-to-last file.
This file, which consists of 128-byte and
8192-byte fixed-format blocks, must be
deblocked to 128-block records (without
adding page numbering or reformatting the
data) before transmission to the LPS. Refer
to the appendix for an example of a typical
host utility program for file transmission.
If you have a user-created SST for an
online system, you do not need to advance
the tape to transfer the first file (which
contains the new sysgen processor).
Simply mount the tape and initiate the file
transfer process at the host.
Enter N and <ENTER>.
Waiting to read files from host.
You can then submit a job from the host to transmit the
next-to-last SST file to the printing system. This file contains
the new sysgen processor, which you must use to build the
new operating system
System files are listed as they are read in from the host onto
the system disks.
End of tape found. Is another tape to be
sent? ’y’ or ’n’
Vary offline at host. Then enter ’C’
10. Request the host operator to vary the
printing system offline, then enter C. (You
need not press <ENTER>.) When the sysgen completes processing, the following is
displayed
* Sysgen process successful *
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
Table 4-5. Steps to perform an online update sysgen
Step Action System Response