Xerox DocuPrint 180, Руководство по генерации системы

Страница: 36 / 94

SYSGEN AND SYSGEN-RELATED PROCEDURES
4-8 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
9. Enter 1 and press <ENTER>.
Entering 1 causes the formatting of the
selected disks to occur.
The following is displayed for DP0: selected
or it is the only drive in the controller:
*******************************************************************************
* Disk unit * 0 * 1 * 2 * 3 *
*******************************************************************************
* Drive Type * * * * *
*******************************************************************************
* Disk Status * Selected * Not present * Not Present * Not present *
*******************************************************************************
*Format * * * * *
* Elapsed * mm:ss * * * *
* Time * * * * *
******************************************************************************
* Total * * * * *
* Usable * * * * *
* Sectors * * * * *
*******************************************************************************
When formatting is completed the following is displayed:
Format/Erase program completed.
System does not have an ID record
Enter system id of up to 30 characters
....*....*....*....*....*....*
>
10. Enter the system ID record of up to 30
characters and press <ENTER>.
System ID IS: xxxxx (the ID record that
you just entered.)
Do you want to enter a new system id?
’y’ or ’n’
11. Enter N and <ENTER>.
Initializing disk drive 0
Creating file BITMAP .$Y$ on drive 0
Creating file MSBLK .$Y$ on drive 0
Creating file BADBLK .$Y$ on drive 0
Creating file CDLYL .$Y$ on drive 0
ENTER CMD (’C’ FOR MENU)>
Table 4-2. Steps to perform a full sysgen (continued)
Step Action System response