Xerox DocuPrint 180, Руководство по генерации системы

Страница: 34 / 94

SYSGEN AND SYSGEN-RELATED PROCEDURES
4-6 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
4. Format the system disks by entering
FORMAT or ERASE and pressing
<ENTER>.
NOTE: System responses reflect the format
procedure. The Erase procedure mimics the
format procedure with the exceptions of
"erase" appearing in some places where
format had been displayed.
The following message displays:
Formatting/Erasing the disks will destroy the
data.
Do you still want to format/erase the
disk(s)? (y or n)
5. Enter Y to continue with the format
Are you sure? [y or n]
6. Enter Y to confirm that you want to continue
the formatting of the disk(s).
NOTE: DP3: will only be displayed if
installed.
For Y, the following is displayed:
**SCSI FORMAT/ERASE VERSION XX RUNNING**
Program operating mode: FORMAT
Located DP0: ...(manufacturer) (disk type)
Located DP1: ...(manufacturer) (disk type)
Located DP2: ...(manufacturer) (disk type)
Located DP3: ...(manufacturer) (disk type)
FORMAT OPTIONS:
1. All disks
2. Selected disk(s)
>
Table 4-2. Steps to perform a full sysgen (continued)
Step Action System response