Xerox Document Centre 706 Series Скачать руководство пользователя страница 60

Страница: 60 / 269

This section gives an overview of the printer drivers.

4.1.1

The PCL 6 printer drivers

The PCL 6 printer drivers are installed on the Windows operating systems to provide a

standard interface between an application program and the DC 706/705/606/605/506/505

series printer. By installing these printer drivers, print jobs are converted into the PJL and

PCL 6 printer languages and then printed through the printer device.

These printer drivers are system specific, each will only run on either Windows 95/

Windows 98/Windows Me, or Windows NT 4.0/Windows 2000. There are altogether two

different printer drivers provided:

PCL 6 printer driver for Windows 95/Windows 98/Windows Me

PCL 6 printer driver for Windows NT 4.0/Windows 2000

The printer drivers for this DC 706/705/606/605/506/505 series printer are named

"DC 706/606/506 CP".

4.1.2

Installation/configuration methods

The methods of installing/configuring all these different printer drivers as well as the

procedures for printing using these drivers are basically the same. Regardless of the

operating system (OS) you are using, the basic steps are similar except for the look of

some of the dialog boxes. Only one printer driver will be used to discuss these

operations in this chapter but any differences among these drivers will be pointed out.

4.1.3

Settings on the DC 706/705/606/605/506/505 series printer

Make sure the PJL switch for the interface is turned to

. If the PJL switch is turned to

OFF

, you may not obtain the desired printing results when using some driver features.

4.1

About the Printer Drivers

Содержание Document Centre 706 Series














































































































































































































































































Результаты поиска

Содержание Document Centre 706 Series

Отзывы:

Xerox Document Centre 706 Series, Руководство пользователя, Страница: 60 / 269

Результаты поиска

Содержание Document Centre 706 Series

Отзывы: