Xerox Document Centre 706 Series Скачать руководство пользователя страница 139

Страница: 139 / 269

123

Setting

Up
for
NetWare

8.1 Using NetWare

8.1.3

Interface

The printer supports the following types of Ethernet interface:

•

10Base-T (Twisted Pair Cable)

•

100Base-TX (Twisted Pair Cable)

The following frame types are supported:

•

Ethernet II specification

•

IEEE802.3 specification

•

IEEE802.3/802.2 specification

•

IEEE802.3/802.2/SNAP specification

The printer will send out packets of each frame type on the connected network and

activate automatically by the frame type which responded first.

However, if other protocols are running simultaneously on the same network, use the

frame type that the NetWare server is using.

Some network components (such as the hub) may not support automatic setup for

frame type. If the data link indicator light of the port which is connected to the printer

of the network component does not light up, match the setting (IPX/SPX setting) of the

frame type of the printer to the frame type of the file server.

Содержание Document Centre 706 Series














































































































































































































































































Результаты поиска

Содержание Document Centre 706 Series

Отзывы:

Xerox Document Centre 706 Series, Руководство пользователя, Страница: 139 / 269

Результаты поиска

Содержание Document Centre 706 Series

Отзывы: