Xerox Document Centre 706 Series, Руководство пользователя, Страница: 140 / 269

$
124
8.2 Setting Up for NetWare
This section describes the flow of setting the printer in a network environment running NetWare.
8.2.1 Flow of setting
Setting up the printer
Set the NetWare interface port to Enable (factory setting: Disable) and activate the
protocol to be used from the printer control panel. Print the printer settings list and
check the device name (Host Interface Setup>NetWare > Device).
"8.3 Setting Up the Printer"
Setting the NetWare print service
Using PCONSOLE or NetWare Administrator (NWADMIN), create print queue,
print server and printer and assign the respective objects.
• When using in the PSERVER mode, use the device name checked in Step
for the print server name. Set Printer Location as Auto Load (Local) .
• For information on how to use PCONSOLE or NWADMIN, see manual
which comes with NetWare. For NetWare 5, only NWADMIN is available for
use.
Setting up the client
Install a printer driver compatible with the printer to a PC. Different printer drivers
are used for different operating systems.
Use a PC that is functioning properly as a client of NetWare.
"8.4 Setting Up the Client"