Xerox Document Centre 706 Series Скачать руководство пользователя страница 4

Страница: 4 / 269

Reception interference:

When installed at a certain location, the machine may cause interference with radio and television reception. If you

notice flickering or distorted images or noises on your audio-visual units, your machine may be causing radio

interference. Switch it off, and if the interference disappears, the machine is the cause of radio interference. Perform

the following procedures until the interference is corrected.

Move the machine and the TV and radio away from each other.

Reposition or re-orientate the machine and/or the TV and radio.

Unplug the machine, TV and radio, and replug them into outlets that operate on different circuits.

Re-orientate the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna, you

should ask your local electrician for support.

Use coaxial cable antennas.

Содержание Document Centre 706 Series














































































































































































































































































Результаты поиска

Содержание Document Centre 706 Series

Отзывы:

Xerox Document Centre 706 Series, Руководство пользователя, Страница: 4 / 269

Результаты поиска

Содержание Document Centre 706 Series

Отзывы: