Xerox Document Centre 255 LP Скачать руководство пользователя страница 39

Страница: 39 / 158

Xerox Document Centre Reference Guide

Page 3 - 11

3. Product

verv

iew

Information Sources

Use the following information sources to answer your questions.

At the Machine

Labels are affixed at points of need throughout the system.
They depict information about loading originals or paper stock.

Green or Gold colored areas.

Gold colored areas typically indicate the handle or levers
to push or pull when removing Replaceable Modules or
Cartridges.

Green colored areas are where you clear jams.

The User Interface Touch Screen displays important messages
about the status of the machine.

The Help system provides you point-of-need information.

At the Workstation

The Quick Start Guide for Networked Users disk contains easy-
to-use and helpful information that will help you get the most
from the ST model machines.

The CentreWare Help System is available by clicking on the
help button on the Print Driver.

Used by the Machine Administrator

The Reference Guide provides detailed information about all
features and settings as well as maintenance.

Содержание Document Centre 255 LP































































































































































Результаты поиска

Содержание Document Centre 255 LP

Отзывы:

Xerox Document Centre 255 LP, Справочное руководство, Страница: 39 / 158

Результаты поиска

Содержание Document Centre 255 LP

Отзывы: