46
Setting up the Fiery XJ as a PostScript printer
6.
Click the General tab, and click Print Test Page.
7.
Click OK in the window that appears.
When you select Print from an application, your PostScript files are transmitted over
the parallel port connection to the Print queue, using the printer driver and the
Fiery XJ printer description file.
Completing the Windows 95 IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print queue for the Fiery XJ. For details see your NetWare documentation and the
Administrator Guide.
T
O
SET
UP
IPX/SPX
PRINTING
:
1.
Open the Windows 95 Control Panel.
2.
Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol and TCP/IP protocol are both listed in
the Installed Network Components section.
For instructions, see your Windows 95 documentation.
N
OTE
:
You must enable TCP/IP printing to ensure that all files required for IPX/SPX
will be installed. You can select it and click Remove after you set up IPX/SPX if you do
not need to use the TCP/IP protocol.
