1
1-37
Setting up PostScript printing with Windows 2000/XP
6.
Click Next.
7.
Make sure that Generic Network Card is selected as Standard for Device Type
and click Next.
8.
Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box and click
Close in the Printer Ports dialog box.
9.
Click Configure Port in the Properties dialog box.
The Configure Standard TCP/IP Port Monitor dialog box appears.
10.
If you have LPD printing enabled at the Fiery Control Panel, select LPR for Protocol
and LPR Byte Counting Enabled under LPR Settings.
N
OTE
:
You can also proceed without selecting LPR Byte Counting Enabled under
LPR settings.
11.
If you have Port 9100 printing enabled at the Fiery Control Panel, select Raw.
The port number 9100 automatically appears under Raw Settings.