Xerox DocuColor 2060, Руководство по устранению неисправностей, Страница: 39 / 60

Troubleshooting Guide 4-13
Clearing jams in the horizontal transport (two-sided printing only)
NOTE: You must clear all other jam areas before
opening and clearing the right and left front door areas.
WARNING
The fuser area is extremely hot, and injury will occur
if this area is not handled correctly.
Figure 4-12. Horizontal transport
To clear a jam in the horizontal transport, perform the
following steps in addition to steps 2 through 8 of the
procedures for clearing jams in the registration, vacuum
transport, and fuser. Refer to “Clearing jams in the
registration, vacuum transport, and fuser” in this chapter.
1. Lift both of the horizontal transport handles 5 and 6.
CAUTION
The paper can rip if you do not push it before removing it
from under the lip of the transport.
2. Apply pressure to the handles to securely latch them.
3. Push the paper back until you see the edge of the
paper, then remove the paper.
4. Reposition handles 5 and 6.
5. Close the right and left front doors.
6. Follow the instructions on the touch screen to restart
your print job.